CALCULATE YOUR PAYMENT

New   SCAG 7B03 WALK-BEHIND 21" KOH SFC-21-7CV  

SCAG   SCAG   7B03  
 
x
  Description

Description

The Scag® SFC-21 Finish-Cut Walk-Behind mower is the compact machine you’ve always wanted—packing big productivity and versatility into a 21” wide platform. On the job or at home, the SFC-21 delivers a professional quality-of-cut that leaves behind a beautiful lawn, each and every time. Capable of 3-in-1 versatility (mulching, bagging and optional side discharging), it helps you tackle whatever challenges come your way with top-notch results.

Features 
back to top
General
General Type: Heavy-duty industrial/commercial Brand: Kohler® Command PRO®
Model: CV173 Horsepower: 5HP @ 3300 RPM
Type: 4 cycle gas, OHV, air-cooled, single-cylinder, vertical shaft engine Displacement: 173 cc
Cylinder: One with cast-iron cylinder bore Governor: Mechanical governor with variable speed control set at 3300 rpm, idle set at 1500 rpm
Air Cleaner: Quad-Clean™ four-stage, cyclonic air filter Exhaust: Side discharge muffler with guard
Oil Pump Group: Steel oil pump; Full pressure lubrication with spin-on oil filter Starter/Electrical: Easy-Pull™ recoil start
50-State Compliant: Yes
back to top
Engine Deck
Thickness: 14 gauge Fuel Tank: 0.37 gallon (1.4 liters) plastic tank
Wheels/Tires: Drive: 10.5 x 3 / Front: 9 x 2.25 Handle Bars: 1″ diameter, thick wall tubing, 3-position adjustable
back to top
Drive System
Type: Transmission Transmission: GT MG 512 transmission, 3-speed
Steering/Travel Control: Variable drive control bar and 3-speed selector lever on handlebar Transmission Output Shaft: 0.50″ diameter
Safety Group: Handle actuated operator presence system Forward Speed: Up to 4.25 mph
back to top
Cutter Deck
Type: High-vacuum, high-capacity design Construction: 14 gauge deck with 14-gauge replaceable guards for strength and longevity. Deep draw stamped.
True Cutting Width: 21 inches (53.34 cm) Cutting Height Adjustment: 1.5″ to 4.5″ in 0.5″ increments
Cutter Blade: 0.1345 in. thick, milled edge, wear resistant Blade Engagement: Blade control bar controlled Blade Brake Clutch (BBC). Connected to cutter blade.
Discharge Opening: Rear-discharge. Extra wide discharge opening. Clutch Type: Heavy-duty Blade Brake Clutch (BBC)
back to top
Optional Items/Attachments
Mulching Plug: Included Fabric Grass Catcher: Included; 2.2 bushels (2.74 cu. ft.)
Side-Discharge Adapter: Available accessory

$2,013

Price In Stock 1 USD 041045   041045   Bill's Tractors  
Request Info on this Vehicle

Request Info on this vehicle

*
*
*
Body WALK BEHND
Stock # 041045
VIN 041045
Make SCAG
Model 7B03
Get Directions

Vehicle Location

Bill's Tractors 10865 US Highway 87 South
Adkins, TX 78101
(210) 649-1715

Bill's Tractors   10865 US Highway 87 South   Adkins   TX   78101  
Disclaimers

The prices listed exclude any applicable taxes, title, license, freight, dealer setup/preparation, document preparation charges by the dealer, labor, installation, and any potential finance charges (should they apply). All promotional sales offers are calculated based on a cash transaction. Standard rate financing available for customers with approved credit. Be aware that the final sales price may vary based on your chosen financing options, as well as the specific vehicle options or accessories you select. For illustrative purposes, we have provided images where possible; these images are intended to serve as reasonable representations of the units offered. They may be either images of the actual unit or manufacturer stock images. Please be aware that some options or features that are not standard may be shown in the images. However, their presence in the images does not guarantee their availability or inclusion in the offered unit. We strive to ensure accuracy in all our listings and descriptions, but Bill's Tractor is not responsible for any errors that may occur. Prices, features, and specifications are all subject to change without prior notice. For the most accurate and up-to-date information, please get in touch with Bill’s Tractor & Equipment, and our team will be more than happy to assist you.

You may also like...

1 vehicles found No filters applied

  • Price

    $2,013

  • VIN: 041045
  • Dealer: Bill's Tractors
  • Stock #: 041045
  • Body: WALK BEHND
The Scag® SFC-21 Finish-Cut Walk-Behind mower is the compact machine you’ve always w ... [Read More]
 
x
© 2025 Bill's Tractor and Equipment. All Rights Reserved. | Responsive Dealer Website provided by SurgeMetrix